cd /usr/bin wget https://raw.githubusercontent.com/CCCam/CCCam/master/cccam-armv7 -O cccam chmod +x cccam Create /etc/cccam.cfg (or /home/root/cccam.cfg depending on the firmware layout).
stop() echo "Stopping CCCam..." killall cccam cccam kanasa install
cat > /etc/cccam.cfg << 'EOF' # Example CCCam configuration SERVER=123.45.67.89 PORT=12000 USER=yourusername PASS=yourpassword # Optional: limit the number of concurrent users # MAX_USERS=5 EOF Add CCCam to the init system so it launches on boot. cd /usr/bin wget https://raw
CCCam (Card Sharing) is a protocol that allows multiple satellite receivers to share a single subscription card. Kanasa is a popular Android‑based satellite receiver firmware that supports a wide range of hardware (e.g., Dreambox, Vu+, Octagon). Installing CCCam on Kanasa lets you connect to a remote card‑sharing server and decrypt encrypted channels. Prerequisites | Item | Minimum Requirement | |------|----------------------| | Hardware | Android‑based satellite receiver running Kanasa (e.g., Dreambox DM‑7020, Vu+ Solo2) | | Storage | ≥ 100 MB free for the CCCam binary and config files | | Network | Stable internet connection (wired Ethernet recommended) | | Access | Root or sudo privileges on the Kanasa system (usually via SSH or telnet) | | CCCam Server Info | Host IP, port, username, password, and optional “user‑limit” settings | Installation Steps 1. Access the Receiver ssh root@<receiver_ip> # or use telnet if SSH is not enabled telnet <receiver_ip> Default credentials are often root/root or root/1234 ; change them immediately after login. 2. Install Required Packages Kanasa is based on Android, so you use apt ‑like package managers provided by the firmware (e.g., opkg ). Access the Receiver ssh root@<receiver_ip> # or use
